UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module
143
Direct purchase from the factory 
सुरक्षित भुगतान
मुफ्त उपहार
शिपिंग नीति
रिटर्न नीतिमुफ्त उपहार
Roymall में आपका स्वागत है, प्रीमियम उपहार की आपकी दुकान। हम आपके समर्थन की सराहना करते हैं और आभार के रूप में हर खरीद पर मुफ्त उपहार प्रदान करते हैं। हमारे संग्रह को देखने के लिए तैयार हैं? हमारे चयन को ब्राउज़ करें, अपना ऑर्डर दें और अपने खरीद के साथ मुफ्त उपहार प्राप्त करें।शिपिंग नीति
हम ऑर्डर 2 दिन में संसाधित करते हैं।सामान्य शिपिंग समय 5-7 कार्य दिवस है।गंतव्य के आधार पर शिपिंग समय अलग हो सकता है।1. रिटर्न नीति
हम केवल roymall.com से खरीदल गइल आइटम स्वीकार करत बानी। मुफ्त उपहार रिटर्न ना कइल जा सके। रिटर्न कइल जाए वाला आइटम अप्रयुक्त और मूल पैकेजिंग में होन चाहीं।हम रिटर्न 3-5 कार्य दिवस में संसाधित करत बानी।कस्टम आइटम रिटर्न ना कइल जा सके।संपर्क करीं: service@roymall.com या Whatsapp: +86193598494712.धन वापसी नीति
रिटर्न आइटम मिले के बाद पूरा धन वापस मिली। शिपिंग लागत वापस ना मिली।संपर्क करीं: service@roymall.com या Whatsapp: +8619359849471
UNO R3 ATmega328P Board:
nDescription:
n
nUNO R3 board is 100% compatible with original , now it has perfect quality and performance .
nis an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
nThis is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
n
nNote:
n
nThe TOSduino Uno R3 requires the 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have 1.0 installed on that machine.
nThe small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.
n
n
n2.8 Inch LCD Display Feature:
nDescription:
n
n2.8 inch LCD TFT display
nBright, 4 white-LED backlight
nColorful, 18-bit 262,000 different shades
n4-wire resistive touchscreen 240 x 320 pixels with individual pixel control
nNo wiring, no soldering.
nSimply plug it in and load library
nOn-board 3.3V 300mA LDO regulator
n5V compatible, use with 3.3V or 5V logic
nSupport 2GB micro SD TF card
nSize: 7.8 x 5.3cm
n
nPackage included:
n
n1 x 2.8 Inch TFT LCD Shield Touch Display Module
n1 x UNO R3 ATmega328P Board with USB cable
n
n
n
n
n
n
n
n
n
n
nDescription:
n
nUNO R3 board is 100% compatible with original , now it has perfect quality and performance .
nis an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
nThis is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
n
nNote:
n
nThe TOSduino Uno R3 requires the 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have 1.0 installed on that machine.
nThe small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.
n
n
n2.8 Inch LCD Display Feature:
nDescription:
n
n2.8 inch LCD TFT display
nBright, 4 white-LED backlight
nColorful, 18-bit 262,000 different shades
n4-wire resistive touchscreen 240 x 320 pixels with individual pixel control
nNo wiring, no soldering.
nSimply plug it in and load library
nOn-board 3.3V 300mA LDO regulator
n5V compatible, use with 3.3V or 5V logic
nSupport 2GB micro SD TF card
nSize: 7.8 x 5.3cm
n
nPackage included:
n
n1 x 2.8 Inch TFT LCD Shield Touch Display Module
n1 x UNO R3 ATmega328P Board with USB cable
n
n
n
n
n
n
n
n
n
n
Electronics Ranking
,,,
